Blåseutstyr for fiber kabel

 

 

 

 

Injection System Powerflow
111.200.00
!
Injection System Powerflow
for blowing in fibre optic cables 8-22mm

Max speed: 80m/min
Required air flow: 10 m3/min
Required air pressure: 12 bar
Control unit and power Pack (125 bar/17 L/min)

Essential!

* Compressors must be equipped with an air cooler!>br>
* Alternatively Powerflow an Multiflowcan also be operated by water!

Injection System Multiflow
111.250.00
!
Injection System Multiflow
for blowing in micro tubes anc convertible for fibre optic cable 8-22 mm

Max speed: 50m/min
Required air flow: 10 m3/min
Required air pressure: 12 bar
Control unit and power Pack (125 bar/17 L/min)

Essential!

* Compressors must be equipped with an air cooler!>br>
* Alternatively Powerflow an Multiflowcan also be operated by water!

Injection System Miniflow
111.300.00
!
Injection System Miniflow
for blowing in fibre optic cables 5-8 mm in tubes: Ø 10-16 mm

Max speed: 80m/min
Required air flow: 1 m3/min
Required air pressure: 15 bar
Control unit and power Pack (125 bar/17 L/min)

Essential!

* Compressors must be equipped with an air cooler!>br>
* Alternatively Powerflow an Multiflowcan also be operated by water!

Injection System Microflow
111.350.00
!
Injection System Microflow
for blowing in optical fibres 1-4 mm in tubes; Ø 5, 7 or 10 mm 

Max speed: 100 m/min
Required air flow: 1 m3/min
Required air pressure: 15 bar
Required electric power supply: 230 V
Rating: 180 W

Essential!

* Compressors must be equipped with an air cooler!>br>
* Alternatively Powerflow an Multiflowcan also be operated by water!

 

Hydraulic Control unit
111.420.00
!
With the control unit pressure and speed are regulated.
The chains of the particular injection system are set in motion by the lever.
The Power Pack is required for Bagela, Powerflow, Multiflow and Miniflow.

Compressor
111.420.00
!

Mobilair M 17/15
Air pressure max.: 15 bar
Air flow: 1 m3/min
(suitable for Miniflow and Microflow)

 

(The aircooler is necessary!)